Smoke Alarm Installation, Upgrades, Testing SE Qld
Our licensed electrician provides photoelectric interconnected smoke alarm installation, upgrades and in compliance with the latest Qld legislation. We have over 30+ years of experience providing electrical services across SE Qld, i.e., Brisbane, Gold Coast, Logan, Ipswich
Get An Instant Quote on Smoke Alarm Installation, Upgrades, Testing SE Qld
Since January 1, 2022, smoke alarms in Queensland must be interconnected photoelectric, and put on every floor, as well as in all bedrooms and corridors. They must be powered by mains power or a non-removable 10-year lithium battery. This requirement applies before a new lease begins, an existing tenancy renews, or the property is sold.
Smoke Alarm Installation Service SE Qld
There has been numerous fire hazards and accidents resulting to loss of property and lives all across Queensland (Qld) and Australia over the years. Smoke Alarm detectors is the first step to detecting fire and smoke and thereby preventing such.
Smoke alarm should be installed by licensed Master Electrician. Our licensed electrician, Wayne Heydon, provides installation, testing, and compliance of smoke alarm. We provide certificiate of compliance upon installation. For new dwellings, the owners and renters are required to install photoelectric interconnected smoke alarm in compliance with the Qld legislation.
Get Best Quotes for Smoke Alarm Installation in Qld
Smoke Alarm Upgrades SE Qld
Hard wired smoke alarm which has been installed on the existing dwellings requires it to be upgraded to photoelectric interconnected smoke alarms. We inspect the property, electrical infrastructure and provide overall upgrades with photoelectric smoke alarm.
Smoke alarm needs to be replaced and upgraded in immediate effect if its not functioning properly
Smoke Alarm Testing and Inspection SE Qld
Smoke alarm should be regularly inspected to ensure its proper functioning. Our Master Electrician provides regular testing and inspection and in the case of any faults, will perform the repairs, maintenance and in the case, when required, maintenance of the smoke alarm. Our electricians perform smoke alarm inspection and testing in compliance with AS 3786 standard.
Why Use Interconnected Photoelectric Smoke Alarms?
Photoelectric smoke alarms have an upper edge to ionized smoke alarms. Some of which are listed below
Unlike ionized smoke alarm, photoelectric smoke alarm are more suspectible in detecting less smoke, toxic smoke and slow burning fires.
Unlike ionized smoke alarm, photoelectric smoke alarm are more suspectible in detecting less smoke, toxic smoke and slow burning fires.
Photoelectric smoke alarms have low maintenance approach in contrast to ionized smoke alarms.
Photoelectric smoke alarms has ease of setup and effortless integration across the overall property.
What If Smoke Alarms is Not Functioning Well?
50% more likely to suffer property loss and damage
25% more likely to suffer serious injuries or fatalities
We're Just a Call Away
Smoke Alarm in Brisbane
Smoke Alarm in Gold Coast
Smoke Alarm in
Logan
Smoke Alarm in Ipswich
Queensland Smoke Alarm Legislation
ENC Solutions Today, follows new smoke alarm legislation, which will make Queensland households the safest in Australia in relation to fire safety. The new legislation specifies that all Queensland dwellings will be required to have interconnected photoelectric smoke alarms in all bedrooms, in hallways that connect bedrooms with the rest of the dwelling and on every level. A 10-year phased roll out of interconnected photoelectric smoke alarms in Queensland will happen over three specific periods starting from 1 January 2017.
Smoke Alarms for Homes in Qld
Landlords are responsible for the installation of smoke alarms that comply with new Smoke Alarm legislation, introduced on 1 January, 2017.
Existing smoke alarms manufactured more than 10 years ago, as well as any smoke alarms that do not operate when tested, must be replaced with photoelectric smoke alarms that comply with Australian Standard 3786–2014.
Landlords and renters Within 30 days before the start of a tenancy in a domestic dwelling, the lessor/landlord must test and clean each smoke alarm in the dwelling. During a tenancy in a domestic dwelling, the tenant must test and clean each smoke alarm in the dwelling, at least once every 12 months.
To test a smoke alarm, press the “test” button. Cleaning should be done according to the manufacturer’s instructions, which is usually vacuuming.You do not need to be qualified or licenced to clean or test a domestic smoke alarm.
Some real estate agents may outsource smoke alarm maintenance to another company with associated fees paid by the landlord. The real estate may request a “certificate of compliance” from these companies as proof of service. This is not a legal requirement but may be part of the real estate agent’s internal process.
Existing smoke alarms manufactured more than 10 years ago must be replaced with
photoelectric smoke alarms which comply with Australian Standards (AS) 3786-2014. (Note: the date should be stamped on the back) Smoke alarms that do not operate when tested must be replaced immediately.
Existing hardwired smoke alarms that need replacement, must be replaced with a hardwired photoelectric smoke alarm. All existing private homes, townhouses and units will require photoelectric interconnected smoke alarms. These must be either a hardwired (eg. 240v) or non-removable 10 year battery powered type alarm.
Landlords are responsible for the installation of smoke alarms that comply with new Smoke Alarm legislation, introduced on 1 January, 2017.
Existing smoke alarms manufactured more than 10 years ago, as well as any smoke alarms that do not operate when tested, must be replaced with photoelectric smoke alarms that comply
with Australian Standard 3786–2014. All smoke alarms should be interconnected within the
dwelling.
Testing and cleaning smoke alarms Within 30 days before the start of a tenancy in a domestic dwelling, the lessor/landlord must test and clean each smoke alarm in the dwelling. During a tenancy in a domestic dwelling, the tenant must test and clean each smoke alarm in the dwelling, at least once every 12 months. To test a smoke alarm, press the “test” button. Cleaning should be done according to the manufacturer’s instructions, which is usually vacuuming.
As part of a building approval process, requiring a Building Certifier, all new homes and renovations should have the required smoke alarms installed pursuant to the requirements of the National Construction Code (NCC), formally known as Building Code of Australia (BCA) and
the Building Regulation 2006.
From 1 Jan 2017
Existing smoke alarms manufactured more than 10 years ago must be replaced with photoelectric smoke alarms which comply with Australian Standards (AS) 3786-2014. (Note: the date should be stamped on the back) Smoke alarms that do not operate when tested must be replaced immediately.
Existing hardwired smoke alarms that need replacement, must be replaced with a hardwired photoelectric smoke alarm.
To get everyone out safely during a house fire, it is essential to also have a well-practised fire escape plan.
Existing landlord’s and tenant’s obligations continue. Property sellers must continue to lodge a Form 24 stating the requirements of the legislation have been met. See New Smoke Alarm Legislation for more details.
From 1 Jan 2022
All homes or units being sold or leased, or existing leases renewed, will require hardwired photoelectric, interconnected smoke alarms. Non-removable 10-year battery smoke alarms can be installed in place
Smoke alarms in the dwelling must: be photoelectric (AS3786-2014); and not also contain an ionisation sensor; and Be hardwired to the mains power supply, if currently hardwired. Otherwise, smoke alarms can be either hardwired or powered by a non removable 10 yr battery or a combination of both be interconnected with every other smoke alarm in the dwelling so all activate together.
Image Attribution: Sensor icons created by Design Circle – Flaticon