Emergency Exit Light Installation and Testing in Logan, Qld by Licensed Electricians at ENC Solutions Today.
Get Best Quotes for Emergency Exit Light Installation in
Logan, Qld
Types of Emergency Lights Installation
ENC Solutions Today, Qld can help you decide which among these three types of emergency signs and lighting would be best for your property.
This emergency lighting system comes with two lamps, but only one bulb works at a time.
This type has only one lamp and illuminates continuously and when the power is cut off from the mains.
It is non-illuminated and is always on charge. The lamp will only illuminate when there is a power outage.
Exit Light Signs Installation
Here are some of the locations where the exit lights signs is to be installed:
- Passageways like mezzanine, stairs, etc.
- Corridors and intersections
- Access points to fire alarms
- Stairways and landings
- Individual steps
- Direction changes
We're Just a Call Away
Emergency and Exit Lights Inspection and Maintenance
Based on the Australian Standards AS2293, the exit and emergency lighting should stay illuminated for a minimum of 90 minutes. It is also required to have it tested and discharged based on the following periods:
- Semi-annually or every 6 months
- Annually
Discharging the batteries every 6 months can prolong the life of the emergency lighting system. The test, on the other hand, will help identify:
- Dull or blown bulbs
- Dead batteries
- Exposed wires
- Damaged units
Image Attribution:
- by rawpixel.com on Freepik
- user6702303 on Freepik