Smoke Alarm Installation in Gold Coast, Qld
ENC Solutions Today offers interconnected photoelectric smoke alarm installation in Gold Coast as per Qld legislation. A professional and cost effective solution by our licensed electricians.
Why ENC Solutions Today For Smoke Alarm Installation in Gold Coast, Qld?
ENC Solutions Today has over 30 years of experience in providing electrical services to the residents and commercial businesses of Gold Coast, Qld. Smoke alarm installation, upgradation, replacement, and repairs for all of Gold Coast from Arundel to Yatala are done by Master Electrician, licensed and insured at ENC Solutions Today. The key advantages of using ENC Solutions Today services for smoke alarm installation in Gold Coast, Qld are as follows:
- Licensed and Fully Insured
- In compliance with the latest Qld legislation
- Professional and friendly services
- Cost effective and competitive solution
- Electrcical experience of 30+ years
Get Best Quotes for Smoke Alarms Installation in Gold Coast
Why Install Interconnected Photoelectric Smoke Alarms in Gold Coast?
All the residents of the Gold Coast are required to install or upgrade or replace with interconnected photoelectric smoke alarms.
There are many benefits to installing interconnected photoelectric smoke alarms for the residents and commercial units in Gold Coast, Qld as opposed to the conventional hardwired smoke alarms. Some of these can be summarized as follows:
- Interconnected photoelectric smoke alarms provide full household coverage.
- Interconnected photoelectric smoke alarms are wireless.
- Interconnected photoelectric smoke alarms are more sensitive to smoldering fires.
- Causes fewer false alarms.
- Do not contain radioactive materials.
Smoke Alarm Inspection and Testing in Gold Coast
As per Qld legislation, smoke alarm has to be periodically inspected and tested ensuring the proper functionality. The licensed electricians at ENC Solutions offers inspection and testing services of smoke alarm for all the residence and dwellers of Gold Coast, Qld.
To keep your smoke alarms clean and functioning, it has to be cleaned each month to remove dust, insects and cobwebs.
Ideally smoke alarms has to be inspected and tested on a monthly basis.
Check lists for smoke alarm testing
- Check that the light on the cover flashes. It should flash at least once every 60 seconds.
- Press and hold the ‘test’ button on the face of the smoke alarm until the alarm sounds, and then release it. The other alarms in your home should also sound as they are interconnected.
- The smoke alarm will stop sounding when the ‘test’ button is released. The alarm will then ‘chirp’ at regular intervals until the battery has recharged again.
- Repeat steps 1 and 2 to test each smoke alarm in the property.
Call To Book An Appointment for Smoke Alarm Installation in Gold Coast
Queensland Smoke Alarm Legislation, for Gold Coast
ENC Solutions Today, follows new smoke alarm legislation, which will make Queensland households the safest in Australia in relation to fire safety. The new legislation specifies that all Queensland dwellings will be required to have interconnected photoelectric smoke alarms in all bedrooms, in hallways that connect bedrooms with the rest of the dwelling and on every level. A 10-year phased roll out of interconnected photoelectric smoke alarms in Queensland will happen over three specific periods starting from 1 January 2017.
Smoke Alarms Installation for Homes in Gold Coast
Landlords are responsible for the installation of smoke alarms that comply with new Smoke Alarm legislation, introduced on 1 January, 2017.
Existing smoke alarms manufactured more than 10 years ago, as well as any smoke alarms that do not operate when tested, must be replaced with photoelectric smoke alarms that comply with Australian Standard 3786–2014.
Landlords and renters Within 30 days before the start of a tenancy in a domestic dwelling, the lessor/landlord must test and clean each smoke alarm in the dwelling. During a tenancy in a domestic dwelling, the tenant must test and clean each smoke alarm in the dwelling, at least once every 12 months.
To test a smoke alarm, press the “test” button. Cleaning should be done according to the manufacturer’s instructions, which is usually vacuuming.You do not need to be qualified or licenced to clean or test a domestic smoke alarm.
Some real estate agents may outsource smoke alarm maintenance to another company with associated fees paid by the landlord. The real estate may request a “certificate of compliance” from these companies as proof of service. This is not a legal requirement but may be part of the real estate agent’s internal process.
Existing smoke alarms manufactured more than 10 years ago must be replaced with
photoelectric smoke alarms which comply with Australian Standards (AS) 3786-2014. (Note: the date should be stamped on the back) Smoke alarms that do not operate when tested must be replaced immediately.
Existing hardwired smoke alarms that need replacement, must be replaced with a hardwired photoelectric smoke alarm. All existing private homes, townhouses and units will require photoelectric interconnected smoke alarms. These must be either a hardwired (eg. 240v) or non-removable 10 year battery powered type alarm.
Landlords are responsible for the installation of smoke alarms that comply with new Smoke Alarm legislation, introduced on 1 January, 2017.
Existing smoke alarms manufactured more than 10 years ago, as well as any smoke alarms that do not operate when tested, must be replaced with photoelectric smoke alarms that comply
with Australian Standard 3786–2014. All smoke alarms should be interconnected within the
dwelling.
Testing and cleaning smoke alarms Within 30 days before the start of a tenancy in a domestic dwelling, the lessor/landlord must test and clean each smoke alarm in the dwelling. During a tenancy in a domestic dwelling, the tenant must test and clean each smoke alarm in the dwelling, at least once every 12 months. To test a smoke alarm, press the “test” button. Cleaning should be done according to the manufacturer’s instructions, which is usually vacuuming.
As part of a building approval process, requiring a Building Certifier, all new homes and renovations should have the required smoke alarms installed pursuant to the requirements of the National Construction Code (NCC), formally known as Building Code of Australia (BCA) and
the Building Regulation 2006.
From 1 Jan 2017
Existing smoke alarms manufactured more than 10 years ago must be replaced with photoelectric smoke alarms which comply with Australian Standards (AS) 3786-2014. (Note: the date should be stamped on the back) Smoke alarms that do not operate when tested must be replaced immediately.
Existing hardwired smoke alarms that need replacement, must be replaced with a hardwired photoelectric smoke alarm.
To get everyone out safely during a house fire, it is essential to also have a well-practised fire escape plan.
Existing landlord’s and tenant’s obligations continue. Property sellers must continue to lodge a Form 24 stating the requirements of the legislation have been met. See New Smoke Alarm Legislation for more details.
From 1 Jan 2022
All homes or units being sold or leased, or existing leases renewed, will require hardwired photoelectric, interconnected smoke alarms. Non-removable 10-year battery smoke alarms can be installed in place
Smoke alarms in the dwelling must: be photoelectric (AS3786-2014); and not also contain an ionisation sensor; and Be hardwired to the mains power supply, if currently hardwired. Otherwise, smoke alarms can be either hardwired or powered by a non removable 10 yr battery or a combination of both be interconnected with every other smoke alarm in the dwelling so all activate together.
Other Services Areas for Smoke Alarms Installation in Qld
Smoke Alarm in Brisbane
Smoke Alarm in Logan
Smoke Alarm in Ipswich
Image Attribution: Sensor icons created by Design Circle – Flaticon